Home > Products > Drive Electronics > Digital Servo Drives > Axor MiniMagnum - Digital Servodrive for Brushless Motors

Axor MiniMagnum - Digital Servodrive for Brushless Motors

Published Jul 16, 2012
Axor MiniMagnum - pict
Axor's Mini Magnum servodrive is compact, competent and cost effective
Axor MiniMagnum - rating table
Rating table

The fully digital Mini Magnum compact servodrive from Axor Industries measures just 66 wide x 201 high x 141deep (all in mm) and weights 1.75kg. The Axor Mini Magnum servodrives are suitable for driving AC brushless servomotors with encoder or resolver feedback. These units can operate directly on a single or three phase mains power supply ranging from 110 – 480V AC, depending on the type:

Mini Magnum 230M series

  • single phase 110-230Vac (±10%)
  • range up to 2kVA

 Mini Magnum 230T series

  • three phase 110-230Vac (±10%)
  • range up to 2.4kVA

Mini Magnum 400T series

  • three phase 380-480Vac (±10%)
  • range up to 4.8kVA

The drives come complete with on-board power supply, EMC filter, dump circuit, detachable plug-in terminals for easy installation and the power stage is designed with latest generation of power IGBTs.

There is a number of operating modes available:

  • ± 10 VDC velocity control or torque control
  • pulse/direction
  • position control
  • encoder follower and
  • PLC function integration.

As standard the Mini Magnum range features:

  • 110÷480 VAC power supply with EMC line filter and in-rush circuit on board
  • Regen circuit with internal power resistor
  • Speeder-One® software interface
  • Parameter setting via keypad or RS232
  • Cable screen connection directly to the front panel
  • Optical isolation between power stage and signals
  • Feedback modes - resolver (2-4-6-8 poles) encoder emulation (sw) - encoder (max 250 KHz) divisible encoder emulation (sw)

Optionally the Mini Magnum cab be specified with:

  • CAN BUS - CAN V2.0B + RS232 to CAN BUS multidrop
  • CAN OPEN protocol implementations: DS301-V4.02 - DSP402-V2.0
  •  RS 485 interface, Mod Bus-RTU based, max. 230 kbps
  • Encoder and resolver feedback version
  • Increased regen capacity via external resistors
  • Safety Enable Function (according to EN954-1/cat.3)
  • Power-out dynamic brake function (with internal power resistor)
  • HBD Holding Brake Drive Card
  • Switching frequency 16 KHz

Typical applications include conveyors, medical equipment, textiles, packaging and converting machinery, feeders and positioners.

Click here for more information on the Mini Magnum or give us a call.