[an error occurred while processing this directive]

Send an e-mail to the author of this page.

[an error occurred while processing this directive]

Thank you! Your e-mail has been sent. Return to the original page.

Girard DYNASET XL worm-wheel sets

Published Jun 28, 2011
Girard DYN XL rng

DYNASET XL high-torque worm-wheel sets can be specified for OEM applications where a complete gearbox is not desirable, either on technical or ecconomic grounds. The worm-wheel sets are supplied loose, comprising the worm-shaft and wheel only.

The DynaSet XL worm-wheel sets can also be supplied with the backlash adjuster (mounted and pre-loaded) which includes the front and rear bearings, the adjustment shims and the o-ring.

For high speed applications, a backlash between 0,5 to 1 arc minute is recommended. For very intermittent applications (rotary tables or milling heads of CNC machines for ex.), a backlash down to zero is allowable. Adjustment can be made via removable shims.

DynaSet XL range:

  • ratios from 5.25 up to 90:1
  • centre / centre distances from 125 to 200mm
  • continuous output torque to over 4700Nm
  • peak torque up to 7800Nm
  • emergency stop torque to 12,800Nm

Typical applications:

  • machine tools
  • rotary tables
  • industrial robots
  • pick-and-place systems
  • tracking systems
  • semiconductor manufacturing