- - CALL US ON - -
Tel. +44 (0)161 217 7100
Metronix DIS 2-48/10 decentralised servo drive
The DIS-2 48/10 is a fully digital AC servo controller for three-phase synchronous and PM DC motors with a supply voltage of 24..48 V DC.
The DIS-2 is optimally suitable for the decentralized employment. It can be mounted directly to the terminal block of the motor or used as a stand alone unit.
There are a number of operating modes to choose from: torque, speed or position control.
Programming and diagnosis are possible via an RS232 or CAN bus interface. The parameterisation program "DIS-2 ServoCommander™” can be used to quickly, easily and comfortably parameterise the DIS-2.
- Compact design with one PCB
- Direct mounting on the motor
- 24..48 V DC, 15 A rated current 40 A maximum current
- High enclosure class up to IP67 when mounted
- Housing temperature up to +70°C
- Encoder evaluation: Resolver, digital and analogue hall sensors, SinCos encoder with HIPERFACE (incremental encoder feedback in preparation)
- Interfaces: RS 232, CAN bus, additional extension slot e.g. PROFIBUS
- Integrated CAN-Bus interface with DSP402
|Supply voltage||24...48 VDC; +/- 20%|
|Rated current IRate||10 Aeff|
|Maximum current IMax for 5 sec||32 Aeff|
|Rated power PRate||500 VA on 48 VDC|
|Maximum power PMax||1500 VA on 48 VDC|
|Clock frequency fPWM||10 kHz|
|Ambient temperature||0° to +70 °C|
|System of protection||IP54, prepared for IP67|
|Dimensions in mm (H x W x D)||110 x 80 x 56|
|Encoder evaluation||Resolver, digital and analogue hall sensors, incremental encoders, sincos encoder with HIPERFACE|
|Interfaces||RS 232, CAN bus, additional extension slot e.g. for PROFIBUS|